Stopping the smoke and fire???

Post Reply
User avatar
3DCGMODELER
Posts: 4
Joined: 09 Dec 2010, 19:10
Location: Spokane WA

Stopping the smoke and fire???

Post by 3DCGMODELER » 30 May 2016, 17:37

Ok got everything going great...

Now what do I need to do to end the smoke and fire, are there some settings..
I need to set to end the smoke and fire say after 200 frames..
I want the simulation to stop producing smoke and fire...


Thanks Mike
Lightwave 2015
"Remember The Vets who fought for our Freedom" ...
Intel I7 980 OC'D to 5.1 GHZ, Water Cooled, Gigabyte MB
32 gig ram, 5 HD's, TITAN Z 12GIG , GTX 560 Ti,
LightWave 11.6.3, 32 and 64 bit

Photoangel
Posts: 3
Joined: 05 Jun 2016, 21:36

Re: Stopping the smoke and fire???

Post by Photoangel » 07 Jun 2016, 21:45

Hello Mike,

if you klick on your turbulence FD tag on your emitter you shouls see under chanels the feeld temperature or densey value ... If you keyframe this value after 200 frames from something to zero the emission stopps but the fire ore smoke generated untul this point will move on in the simulation.

http://help.jawset.com/en/c4d/emitter_p ... s/channels

Best regards
Andreas

Post Reply